Do you know the normal use of CNC lathe what conditions must be met?
Do you know the normal use of CNC lathe what conditions must be met? Release date: 2016 04 - 27 clicks: 2307 CNC lathes, turning center, is a kind of high precision, high efficiency of automatic machine tools. Equipped with multi-station dao tower or power tower, the machine will have a wide range of processing technology, performance can be processed straight cylindrical, slash cylinder, circular arc and a variety of thread, groove, worm and other complex artifacts, compensated by linear interpolation, arc interpolation function, and in the mass production of complex parts in good economic effect. The normal use of numerical control lathe to meet what condition? Do you understand? Want to know and see it together: 1. Specification using lathe: when users in the use of lathe, not allowed to change the parameters of the control system within the factory setting. Set these parameters directly related to the dynamic characteristics of lathe parts. Only the backlash compensation parameter values can be adjusted according to actual condition. 2. Temperature: the numerical control lathe environment temperature taken in less than 30 degrees, relative humidity is less than 80%. In general, the numerical control electric cabinet with internal fan or cooling fan, to maintain the electronic components, especially the CPU working temperature or constant temperature difference is very small. High temperature and humidity will lead to lower control system component life, and leads to failure. The increasing of temperature and humidity, dust can produce binder in integrated circuit boards, and cause a short-circuit. 3. User can't change the lathe accessories, such as using the above specification of the hydraulic chuck. When factory set up attachment, give full consideration to the link parameters matching. Blind change caused the link parameters do not match, even causes the accident that can't estimate. Using hydraulic chuck, hydraulic head and tailstock, hydraulic oil cylinder pressure, should be in the range of the allowable stress does not allow any improvement. More information related to the numerical control lathe in genesis lathe. 4. Environment: the location of the lathe should be far away from the source, should avoid direct sunlight, and the influence of thermal radiation, avoid the influence of humidity and airflow. Near the source, such as lathe, the lathe should be set up around the antivibration ditch. Otherwise will directly affect the machining precision of lathe and stability, will make electronic components poor contact, failure, affect the reliability of the lathe. 5. Power supply: general numerical control lathe in machining workshop installation, environment temperature change is big, not only use condition is poor, and all kinds of mechanical and electrical equipment, power grid volatility. Therefore, the location of the numerical control lathe installation, need to have strict control power supply voltage. The power supply voltage fluctuation must be within the scope of the permit, and remained relatively stable. Otherwise it will affect the normal work of the CNC system.